metal stamped wedding jewelry

Metal Stamped Newlywed Necklaces two

Make a pair of matching Metal Stamped Newlywed Necklaces for the happy couple with our DIY Stamped Newlywed Charms. These charms feature tiny 1.5mm stamps, which we love because they fit on small blanks with ease. The key is to line them up in order on your table or bench before you start stamping. You can still start in the center and work side to side, but this helps keep things organized as you go along.

You will need:
1/16 Inch 1.5mm Uppercase Letter and Number Sans Serif Font Stamps
1/8 Inch Uppercase Sans Serif Letter Stamps
ImpressArt, Circle, Nickel Silver, 3/4″ Stamping Blank
ImpressArt, Circle, Nickel Silver, 3/4″ Stamping BlanksImpressArt, Heart w/ Ring, Nickel Silver, 1/2″ Stamping Blank
Beadalon 6-MM Jump Rings, Silver Plated
Ball Chain Necklaces 18 Inch With Loster Clasp
Folk Art Enamel Acrylic Paint, Licorice
ImpressArt- 6mm, Girl Profile Metal Stamp
ImpressArt- 6mm, Boy Profile Metal Stamp
ImpressArt- 6mm, Equal Symbol Metal Stamp or ImpressArt Design Stamps, 6mm, Lace Heart
Ergo-Angle Metal Stamping Hammer
ImpressArt 2 by 2-Inch Steel Block
ImpressArt Hole Punch Pliers
Wood Handle Scratch Awl
ImpressArt Stamp Straight Tape
2 Pairs ImpressArt Chain Nose Pliers
Cotton Swab
Paper Towel

Step One: Stamp silhouettes on hearts.

Step Two: Stamp initials inside of silhouettes on hearts using the 1/8″ stamps.

Step Three: Stamp LET LOVE RULE around edge and heart or equal symbol in center of the largest circles using the 1/16″ stamps.

Step Four: Stamp wedding date around the edge of the smaller circles using the 1/16″ stamps. Use awl as a stamp to add dots between numbers.

Step Five: Use chasing hammer to add texture.

Step Six: Use fingertip or cotton swab to apply enamel to the stamped areas of your blanks. Let sit for 10 seconds, wipe clean with paper towel or soft cloth.

Step Seven: Use hole punch pliers to pierce holes in top center of circle blanks.

Step Eight: Layer charms on jump ring smallest to largest, secure jump ring closed with tension. Slide charms on ball chain necklace.

Metal Stamped Newlywed Necklaces One

You can personalize these Metal Stamped Newlywed Necklaces to suit the happy couple, ImpressArt has an eclectic array of design stamps that open up all sorts of possibilities. We hope you enjoy this project and if you make some, we’d love to see them!

Happy Stamping,
Margot and Avalon

Metal Stamped Valentine Pendants

(Disclosure: Affiliate links in post, if you follow the link and make a purchase we get a small percentage of the sale.)

Love is in the air and Valentine’s day is almost here! Make some Metal Stamped Valentine Pendants to show your special someone you cherish them forever! We’re going to show you how.

Once you’re married, it can be tough coming up with something original for Valentine’s Day. Flowers, candy…been there, done that. Why not stamp up a personalized set of pendants for your sweetheart with both of your initials and wedding date? Isn’t it romantic? She can wear the heart, he can wear the date, they can wear them together or apart. This makes a lovely DIY wedding gift too. It’s so easy to stamp into these new SoftStrike pewter blanks from ImpressArt, anyone can do this.

You will need:
ImpressArt- Basic Newsprint Uppercase Letter Metal Stamp Set
ImpressArt- Basic Newsprint Numbers Metal Stamp Set
Wood Handle Scratch Awl
Ergo-Angle Metal Stamping Hammer
ImpressArt 2 by 2-Inch Steel Block
ImpressArt Stamp Straight Tape
ImpressArt Stamping Blank Rectangle, 1.5-Inch by .3125-Inch, 2-Pack
ImpressArt, 0.75-Inch by 0.75-Inch, Pewter Hearts
Beadalon Jump Ring 6mm
Ball Chain Necklace With Clasp
Folk Art Enamel Acrylic Paint, Licorice
Cloth or paper towel

Metal Stamped Valentine Pendants Steps

Step one: Tape your heart blank down to the bench block, align tape just below the center of the heart. Stamp ‘&’ symbol in center and the first initials of the happy couple on either side. Step two: Wipe paint across letters, wipe off excess with paper towel. Step three: Use bent and chain nose pliers to attach pendant to jump ring and chain. Step four: Tape the rectangle pendant to the bench block. You can stamp left to right or top to bottom. Stamp date. Use an awl or a period stamp in between the numbers of the date. Make sure you don’t hit the awl too hard, pewter is softer than base metal. Step five: Swipe paint across surface of stamp. Wipe off excess. Step six: Attach pendant to jump ring and ball chain.

Metal Stamped Valentine Pendants Two

Now you can make Metal Stamped Valentine Pendants they’re sure to love! New to metal stamping? Here are some tips for metal stamping success. Want more metal stamping? Subscribe via email in the sidebar and never miss a post!

Cheers,
Margot & Avalon

*DIY Project Policy: Our tutorials are meant for your creative inspiration. Feel free to make and gift or wear these designs. Please make sure that you give credit to us as the designer if you make and share these designs on your blog or social sites. Please do not make and sell copies of our designs or sell them as kits. Please do not teach these designs as classes for profit. This is how we make our living and we ask that you respect our creativity and the time it takes to design, photograph and write these free tutorials. You may use a single photograph from each project online in blog round-ups or blog posts if you include a direct link back to our tutorial. Any use of these designs for retail sale for profit online in places like Etsy or eBay or in retail bricks and mortar, flea markets or outdoor fairs is not permitted. Thank you!

Follow on Bloglovin

Warby Parker

Pages