DIY hand stamped jewelry

DIY Tassel and Stamped Charm Bracelets

September 8, 2024 by decey Leave a Comment

Bliss Metal Stamped Tassel Bracelets Two Text

Just in time for warmer weather, pretty beaded bracelets get a kicky update with stamped charms and handmade tassels. Make your own DIY Tassel and Stamped Charm Bracelets in an array of colors and you’ll be in style bliss. We’re loving the Boho appeal here, try changing up the beads, colors and message to suit your own style. Speaking of which, how would you style these? We’d love to know! Big love to the amazingly talented Ms. Pattie Wilkinson for sending us her fabulous *PattieWack tassel tools! They make quick and easy work of making gorgeous tassels.

You will need:

ImpressArt, Pewter Stamping Blanks, River Stone, 3/4″
3-4mm Swarovski Crystal Beads
4mm gemstone beads
3-4mm Freshwater Pearls
Beadalon 19-Strand Bead Stringing Wire, 0.018
Beadalon Toggle Clasps Small Silver Plated
2 Tube Crimp, Silver -2x2mm
3 Beadalon Jump Rings 6mm Silver Plated
Beadalon 10mm Jump Ring Silver Plated
German Style Wire, Round, Silver Plated, 24 gauge
Lion Brand Yarn Bonbons Yarn, Brights
Folk Art Enamel 2-Ounce Acrylic Paint
ImpressArt Newsprint Lowercase Alphabet Metal Stamps
ImpressArt 2 by 2-Inch Steel Block
ImpressArt Stamp Straight Tape
Ergo-Angle Metal Stamping Hammer
Pattiewack Designs Mini Tassel Maker
ImpressArt Chain Nose Pliers
ImpressArt Bent Nose Pliers
ImpressArt Flush Cutters
Beadalon Beading Scissors

Tassell Bracelet 1-4

One: Tape blank to bench block. Stamp ‘bliss’, alternating placement of letters. Design tip: Start with the ‘i’ in the center and work to both sides. Two: Wipe multi-surface paint on blank. Wipe paint from surface. Three: Place beads on board in a pattern, build beads up to numbers on side to fit your wrist. Add the two numbers together to get the finished length in inches. Our bracelet is 7″ including the clasp. Four: Thread wire into crimp bead. Thread wire back through clasp end and back into crimp tube. Hold wires uncrossed to crimp. Check out this video to learn how to crimp correctly!

Tassell Bracelet 5-8

Five: Finish bracelet with crimp bead attached to jump ring. Design tip: Make sure bracelet is rounded to allow a little space between your beads, this keeps the bracelet from being too stiff when worn. Six: Attach finished bracelet to bar side of toggle clasp with a second jump ring. This makes it easy for the bar to fit into the circle element of the clasp. Seven: Get your yarn and mini-tassell tool ready! Eight: Wrap the yarn around the second notch on the tassel tool as in photo.

Tassell Bracelet 9-12

Nine: Follow instructions for tassel tool. Instead of using yarn to tie off the top and bottom, we’re using a large jump ring and wire. Thread jump ring into top of tassel. Wrap wire tightly several times around center of tassel. Cut bottom of tassel with scissors into fringe. Side tassel from tool. Use scissors to even tassel ends. Ten: Finish wrapping tassel tightly with wire, cut off excess. Tuck ends into tassel with chain nose pliers. Eleven: Attach tassel and tool to circle side of toggle using a smaller jump ring as in picture. Twelve: Make more!

DIY Tassel and Stamped Charm Bracelet LS Text

That’s it, fun, fast and fabulous DIY Tassel and Stamped Charm Bracelets, make an arm full!

Cheers,
Margot and Avalon

FTC DISCLOSURE: Bloggers were provided with samples for use in this project. All opinions are 100% their own!

*DIY Project Policy: Our tutorials are meant for your creative inspiration. Feel free to make and gift or wear these designs. Please make sure that you give credit to us as the designer if you make and share these designs on your blog or social sites. Please do not make and sell copies of our designs or sell them as kits. Please do not teach these designs as classes for profit. This is how we make our living and we ask that you respect our creativity and the time it takes to design, photograph and write these free tutorials. You may use a single photograph from each project online in blog round-ups or blog posts if you include a direct link back to our tutorial. Any use of these designs for retail sale for profit online in places like Etsy or eBay or in retail bricks and mortar, flea markets or outdoor fairs is not permitted. Thank you!

DIY Atlas Pendants

August 21, 2024 by decey Leave a Comment

DIY Atlas Pendants

No matter where you roam, home is where your heart is. Show your love for the place you call home with these DIY Atlas Pendants. We used vintage atlas pages, you can find these at thrift stores, flea markets or yard sales. Or you could print out an image of the place you call home on a map to size. Add a stamped metal charm, tiny paper heart and some decoupage medium and you can wear your heart around your neck any time you feel a little homesick. (Want to get started metal stamping? We’re GIVING AWAY a kit with everything you need to get started this week!)

Materials:

1.5″ acrylic circle pendant
1/5″ punched atlas page circle
Red card stock
Collage Pauge Instant Decoupage Glossy
Folk Art Enamel Acrylic Paint, Licorice
Brass Heart Stamping Blank
Beacon Zip Dry Paper Glue
Large Circle Punch
10mm Silver Tone Jump Ring
Ball Chain with Connector
1/16″ Metal Stamp Uppercase Letters
Awl
ImpressArt Brass Stamping Hammer
ImpressArt Steel Stamping Block
Impress Art Stamp Straight Tape
Toothpick
Cotton swab
Paper towel

Amazon.com Widgets

Atlas Steps

Step one: Tape your blank to your bench block. Slide stamps down to top of tape, start in center and stamp to edges. The letter ‘m’ should be in the center because you’re adding a period. Use an awl or punctuation stamp to add the period. Step two: Dab paint into letters. Let paint set for 30-40 seconds. Wipe off excess on surface. Step three: Punch or cut the atlas circle to fit pendant. Fold red card stock and use small scissors to hand cut tiny heart. Step four: Use a toothpick to apply a small dab of paper glue to back of heart. Press heart on to the area of atlas you want to highlight. Allow to dry. Step five: Add a thin layer of decoupage medium to back of pendant and front of atlas paper. Press together, gently pressing out any bubbles with fingertips. Allow to dry, paint a second coat of decoupage medium. Allow this to dry overnight. Step six: Use chain nose pliers to connect stamped pendant to acrylic pendant. Attach to your ball chain.

Atlas Model Closer Text

These are simple to make and fun to wear. They make fabulous gifts for students heading off to college! Make a map full of DIY Atlas Pendants for family and friends. We’d love to know where you hang your heart, tell us in the comments.

Atlas Pendants Take Two

Cheers,
Margot and Avalon

10 Minute Craft: Queen Bee Earrings

March 22, 2024 by decey Leave a Comment

Queen Bee Earrings One

Got ten minutes? Then you’ve got enough time to make these punny earrings and show ’em who’s Queen Bee. Heck, you can make up a whole hive’s worth! In fact, you can make these Queen Bee Earrings in just three easy steps, just stamp, ink, connect and wear! Even the busiest gal has time for that. And don’t be afraid, the new Soft Strike pewter stamping blanks from ImpressArt make it easy to make a great first impression. You got this!

What you need:

2 ImpressArt Stamping Blank Washer, 15/16-Inch, Pewter
2 Fine Silver Plated Pewter Small Honey Bee Charms
2 Beadalon 10-MM Jump Ring, Silver Plated
2 Beadalon Dapped and Spring Ear Wire, Silver Plated
ImpressArt Newsprint Stamps in Lowercase and Uppercase
ImpressArt 2 by 2-Inch Steel Block
Ergo-Angle Metal Stamping Hammer
ImpressArt Stamp Straight Tape
ImpressArt Bent Nose Pliers
ImpressArt Chain Nose Pliers
Cotton swab
Paper towel

Steps 1-4

Step one: Stamp ‘Q u e e n’ on each blank. Start at the bottom center with the letter ‘e’ and work up each side, spacing your letters evenly as in photo. Step two: Use cotton swab to dab ink into letters. Wipe excess off of surface with paper towel, leaving ink in the stamped areas. Step three: Connect the washer, charm and ear wire in that order to a 10mm jump ring using the bent and chain nose pliers. You may need to gently turn the loop at the bottom of your ear wire so they hang forward. Step four: Wear them with pride because you made them!

“You can call me Queen Bee,
and baby I’ll rule, I’ll rule,
let me live that fantasy.”
Lorde

These Queen Bee Earrings would make a lovely Mother’s Day gift too, I’m just sayin’.

Cheers,
Madge

*DIY Project Policy: Our tutorials are meant for your creative inspiration. Feel free to make and gift or wear these designs. Please make sure that you give credit to us as the designer if you make and share these designs on your blog or social sites. Please do not make and sell copies of our designs or sell them as kits. Please do not teach these designs as classes for profit. This is how we make our living and we ask that you respect our creativity and the time it takes to design, photograph and write these free tutorials. You may use a single photograph from each project online in blog round-ups or blog posts ONLY if you include a direct link back to our tutorial. Any use of these designs for retail sale for profit online in places like Etsy or eBay or in retail bricks and mortar, flea markets or outdoor fairs is not permitted. Thank you!

(FTC DISCLOSURE: *This post contains affiliate links, if you click on a link and make a purchase we get a small percentage of the sale. The blogger is employed by ImpressArt, but this is her personal blog. All opinions are 100% her own!)

Metal Stamped Cupcake Necklace

February 27, 2024 by decey Leave a Comment

Cupcake two

We’re big fans of cupcakes, because, well, cupcakes. Need we explain further? This cloud blank from ImpressArt has a lot of potential beyond being a cloud! It makes the perfect frosting for a metal stamped cupcake or the ice cream topper on a waffle cone or maybe a fun hairdo! Some of our best designs come from ‘seeing’ things differently. You could rivet these components together, but we love the kinetic movement achieved by layering them. Try making the sprinkles different colors with enamel paints or color the icing with patinas. we like it just as it is, simply striking. Pardon the pun. If you’d like to make a Metal Stamped Cupcake Necklace of your own, grab the instructions!

You will need (These are affiliate links, if you click on a link and make a purchase, we get a small percentage of the sale):
ImpressArt, Circle, 1/2″, Aluminum Stamping Blanks- 24 pc.
ImpressArt- Pewter Stamping Blanks, Cloud
Copper 24 Gauge Sheet – 6″ x 6″
4 Beadalon Jump Ring 6mm Silver, Plated, 50-Piece
Ball Chain with Connector
Folk Art Enamel Acrylic Paint, Licorice
ImpressArt- 6mm Sprinkle Pattern Metal Stamp
ImpressArt 6mm, Vertical Lines Metal Stamp
ImpressArt Basic Metal Stamp Set, Uppercase, 1.5mm
ImpressArt Stamping Hammer, 1-Pound, Brass Metal
ImpressArt 4 by 4-Inch Steel Block, Large
Beadalon Leather Pad For Block and Anvil
2 pairs ImpressArt Jewelry Making Tools – Pliers and Stamping Hammers – Perfect for custom designed metal and bead jewelry
Metal Cutting Shears
Beadsmith Metal Hole Punch Pliers for Sheet Metal, 1.5mm
Eurotool Metalwork Deluxe Dapping Set Block With 24 Punches
Stanley 69-122 6-1/16-Inch Wood Handle Scratch Awl
ImpressArt Stamp Straight Tape
Non-permanent marker
Cotton swab
Paper towel or soft cloth

Cupcake 1-4

Step one: Tape blank to bench block. Use sprinkles stamp to add texture to surface of blank. Step two: The bottom part of your cupcake is layered behind the cloud blank. Use the blank as a guide and draw the cupcake liner form. Step three: Cut the sheet metal with your sheers. You need it to hide behind the front blank, so after you cut the sheet metal, you may need to cut it a little more to fit. Step four: Use the line stamp to create the liner texture, this will overlap a bit and that’s okay! You’ll need to hit this pretty hard to make even impressions so don’t be shy!

cupcake 5-8

Step five: Layer the cloud blank over the cut metal, mark the hole placement. Step six: Use the hole punch pliers to punch the holes. Step seven: stamp YUM into the blank, add a period with the awl. Step eight: Use a cotton swab to apply the paint to the stamped areas on the small blank, wipe off excess with a paper towel or soft cloth.

cupcake 9-12

Step nine: Place the stamped small blank into the dapping block, it should just fit inside of the cup. Strike tool with hammer, moving tool around as you strike to create a domed shape. Step ten: When you the blank is evenly dapped, remove it from the dapping block. Step eleven: It should be nicely domed like in the photo. Step twelve: Use the hole punch pliers to pierce a hole in the top of the blank.

cupcake 13-16

Step thirteen: Connect the blanks as shown. Attach a third jump ring to bring the first two rings together. Step fourteen: Attach a fourth jump ring to the stamped blank and through the third jump ring on the bottom two blanks. Step fifteen: Attach the pendant to the ball chain. Step sixteen: Enjoy you calorie free Metal Stamped Cupcake Necklace whenever you like!

DIY Cupcake Pendant One

If you like our tutorials, we’d love it if you help support us by shopping our links above! That’s how we are able to keep sharing these DIY projects with you!

Cheers,
Margot and Avalon

16 Stunning Hand Stamped Jewelry Projects

February 26, 2024 by decey Leave a Comment

Hand Stamped Jewelry Projects Round Up

Do you love metal stamping? We do too! We’ve gathered up 16 Stunning Hand Stamped Jewelry Projects from some of our favorite DIY Bloggers for your creative inspiration. Get the tutorials on their blogs and while you’re there check out the rest of their divine DIY ideas. It’s amazing how many beautiful things you can make once you master a few basic techniques. There’s a little bit of everything here from earrings to bracelets to pendants, so there’s surely a few projects here that will jump start your imagination.

Hand Stamped Happy Girl Earrings 2